Asus A8V User Manual page 72

HyperTransport Configuration
HyperTransport Configuration
HT Frequency
HT DATA Width (Upstream)
HT DATA Width (Downstream)
HT Frequency [1000 MHz]
Allows frequency selection of HyperTransport transfer from K8 CPU to
AGP. Configuration options: [200 MHz] [400 MHz] [600 MHz] [800 MHz]
[1000 MHz]
HT DATA Width (Upstream) [16 BIT]
Allows selection of HyperTransport upstream data width.
Configuration options: [16 BIT] [8 BIT]
HT DATA Width (Downstream) [16 BIT]
Allows selection of HyperTransport downstream data width.
Configuration options: [16 BIT] [8 BIT]
Memory Configuration
Memory Configuration
Memclock Mode
DRAM Over 4G Remapping
Bank Interleaving
Node Interleaving
Burst Length
CAS Latency (CL)
TRC
TRFC
TRCD
TWR
TRWT
TRAS
TRP
TWCL
AsyncLat
Read Preamble Setting
2T Command
Memclock Mode [ Auto]
Allows you to set the memory clock mode. Set by the code using [Auto] or
select [Manual] to set using one of the standard values.
Configuration options: [Auto] [Limit]
4-16
[1000 MHz]
[16 BIT]
[16 BIT]
[Auto]
[Disabled]
[Auto]
[Disabled]
[8 Beats]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
K8 CPU to AGP
HyperTransport
Frequency Selection
MEMCLK can be set
by the code using
AUTO, or if you use
LIMIT, you can set
one of the standard
values.
Chapter 4: BIOS Setup