Configuring The Brother Print/Fax Server (Queue Server Mode In Nds Mode) Using Bradmin Professional Utility - Brother NC-9100h Network User's Manual

Configuring the Brother Print/Fax Server
(Queue Server Mode in NDS mode) using BRAdmin
Professional utility
1
Make sure that you logged in as ADMIN in NDS mode.
2
Start BRAdmin Professional utility.
3
One or more Print/Fax server services will appear in the list of
printers (the default node names are BRN_xxxxxx , where
xxxxxx is the last six digits of the Ethernet address (MAC
address)).
You can find the node name and MAC address by printing
out the printer configuration page. Refer to the User's Guide
Chapter 23 for information on how to print the configuration
page on your Print/Fax server.
4
Select the printer that you wish to configure and double click it.
You will be asked for a password. The default password is
access .
5
Select the NetWare tab.
a
If it is not already selected, select Queue Server as the
operating mode.
b
Select the correct NDS tree and NDS context (you can
manually enter this information, or by clicking on the down
arrow by the side of NDS tree and the Change button by the
side of NDS Context, you can let BRAdmin Professional utility
display your choices automatically). Once you have specified
this information, click on the Change NDS queues button.
c
In the NetWare Print Queues screen select the appropriate
TREE and Context and then click the New Queue button.
d
Enter the queue name and specify the volume name. If you
do not know the volume name, select the Browse button to
browse the NetWare volumes. When the information is
entered correctly, select the OK button.
6 - 8 NOVELL NETWARE PRINTING