MSI K7N2M Manual page 67

MS-6777 M-ATX Mainboard
MSI Reminds You...
IRQ (Interrupt Request) lines are system resources allocated to I/
O devices. When an I/O device needs to gain attention of the oper-
ating system, it signals this by causing an IRQ to occur. After re-
ceiving the signal, when the operating system is ready, the system
will interrupt itself and perform the service required by the I/O
device.
After AC Power Lost
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
Off
On
Last State
3-24
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the status before power failure or
interrupt occurred.