Checking The Strength Of The Digital Signal - ProScan 332LA25T User Manual

Checking the strength of the digital signal

This shows the current digital signal strength as a picture.
< Before Starting >
Keep the digital TV receiving mode as is.
1. Press [MENU].The Menu will appear.
2. Press [ / ] to move to <Channel>, then press [OK].The <Channel> Menu will appear.
3. Press [ / ] to move to <Signal Strength>, then press [OK]. The reception sensitivity will be shown in the
menu.
4. Press [EXIT] to exit the menu.
Menu Transparency Settings
Menu Transparency sets the background transparency of the menu.
1. Press [MENU]. The Menu will appear.
2. Press [ / ] to move to <Setup>, then press [OK].The <Setup> Menu will appear.
3. Press [ / ] to move to <Menu Transparency>, then press [OK]. <Menu Transparency> will be selected.
4. Press [ / ] to select the transparency, then press [OK]. There are 4 options in menu transparency:
<Opaque>, <Semi Opaque>, <Semi Trans> and <Transparent>.
Press [EXIT] to exit the menu.
Power Saving Mode Settings
E.SAVING
Press [E.SAVING].
- Each time [E.SAVING] is pressed, <Standard> and <Saving> modes are switched. <Saving> mode
conserves power.
17