Automatic Channel Settings - ProScan 332LA25T User Manual

Remote Control Instructions
Caution
- Used batteries should be recycled and kept out of children's reach.
- Do NOT use new and old batteries together.
Change both batteries at the same time.
- When not using the remote control over a long time, remove the batteries from the unit.
Use only Alkaline batteries.

Automatic Channel Settings

Any receivable channels can be memorized automatically. Press [MENU]. The menu will appear.
Press [ / ] and move to <Channel>, then press [OK]. The <Channel> menu will appear.
Press [ / ] and move to <Auto Memorizing>, then Press [OK]. The <Auto Memorizing> menu will appear.
Press [ / ] to move to the type of Antenna connection, and press [OK], The <Auto Memorizing> menu
will appear. Press [ / ] to check the status, then press [OK]. The <Auto Memorizing> menu will appear.
After memorizing all receivable channels, a menu appears with the number of channels that have been
memorized. Press [EXIT] to exit the menu.
<Useful Tips>
When <Air + Cable> is selected, the TV searches for channels (both Analog and Digital) from the
antenna input.
When selecting <Air> only, only Air channels are scanned (Analog, Digital).
When selecting <Cable> only, only Cable channels are scanned (Analog, Digital).
If any antenna connection status is changed, please perform automatic channel memorization again.
When stopping the automatic channel scan, the automatic channel selection will not be completed.
Only channels used in the menu will be set up.
13