Remote Control Instructions
< Inserting the batteries into the remote control >
"
"
1.Push the
mark at the back of the remote control and pull forward slightly.
2.Insert two AAA 1.5V batteries ensuring the correct polarity (+/-).
3.Close the lid.
Inserting the batteries
Caution: Use only Alkaline Batteries.
If the remote control is not working, see the checkpoints below.
Are the polarities of the batteries (+, -) correct
Are the batteries worn out
Was there an AC power failure
Is the power cable plugged in
Is any special fluorescent or neon sign board turned on
< Remote Control Reception Angle>
Use the Remote control within a range of 7~10m and at an angle of 30 to either side of the receiver.
Remote Control TV Angle
?
?
?
?
12
?