Checking Memorized Channels - ProScan 332LA25T User Manual

Checking memorized channels

Press the [CHANNEL] buttons.
- Pressing the [CHANNEL] buttons will select only the memorized channels sequentially.
Selecting DIGITAL channels only
AIR/CABLE
Pressing [AIR/CABLE] will select only the memorized digital channels sequentially.
Antenna Settings
1. Press [MENU]. The Menu will appear. Press [ / ] to move to a <Channel>, then press [OK].
The <Channel> menu will appear. Press [ / ] to move to <Antenna>, then press [OK]. The <Antenna>
menu will appear. Press [ / ] to select Air or Cable. Press [EXIT] to exit the menu.
<Useful Tips>
An air signal is transmitted via VHF/UHF over the air, analog is NTSC, and digital is ATSC with a VSB
modulated signal.
A cable signal is a cable transmitted signal, analog is NTSC, and digital is SCTE with a QAM modulated
signal.
Adding or Removing Channels
After memorizing the channels, you may add more channels not added due to a weak signal, or you may
remove unwanted channels.
< Adding or removing the current channel >
Press the number of the channel to memorize, then press the [ADD/DEL] button.
For example, to add a channel, press the number of the channel, then press [ADD/DEL].
When the [ADD/DEL] menu appears, press [OK] to either add or remove.
< Adding or removing all memorized channels >
1. Press [MENU]. The Menu will appear.
2. Press [ / ] to move to <Channel>, then press [OK] to finish. The <Channel> menu will appear.
3. Press [ / ] to move to <Channel List>, then press [OK]. The <Channel List> menu will appear.
4. Press [ / ] to move to the channel you wish to add and then press the
If the channel has the
Press it again and the
5.Press the [EXIT] button to exit the menu.
<Useful Tips>
To confirm the added channel after the menu disappears, press [CHANNEL].
CHANNEL
mark, the channel is added.
will disappear and the memorized channel is removed.
14
[RED] Button.