Installing The Front Bezel; Removing The Drive Cage - Dell OptiPlex 9010 Owner's Manual

Installing the Front Bezel

1. Insert the hooks along the bottom edge of the front panel into the slots on the chassis.
2. Rotate the bezel toward the computer to engage the front panel retention clips until they click into place.
3. Install the cover.
4. Follow the procedures in

Removing the Drive Cage

1. Follow the procedures in
2. Remove:
a. cover
b. front bezel
3. Remove the data cable and power cable from the optical drive.
10
After Working Inside Your Computer .
Before Working Inside Your Computer .