Table of Contents
Advertisement
Installing Grill Head
Remove grill head unit from carton, then place onto
1.
cart from above as shown on diagram (below). Caution!!
Head unit is heavy. To avoid injury, we strongly
recommend 2 or more persons for this step.
3. Align screw holes located on the outside of the grill.
(Fig.10)
Attach the grill head to right side panel using (4) ¼ x 3/5"
3.
screws with (4) ¼" washers. (Fig.11)
4. Secure using (2) 5/32 x 2/5" Phillips head screw and (2)
5/32" nuts with (2) 5/32" lock washers attach the side
burner heat shield and firebox heat shield together.
(4) 5/32 x 2/5"Phillips head screw
washers attach these Shield on the leg and firebox bottom.
See (Fig 12.)
Insert
with (4) 5/32" lock
Figure 10
5/32x1.38"
Figure 11
Figure 12
10
Advertisement
Table of Contents
