Firmware Upgrade; Dhcp Connections - Verizon FiOS-G1100 User Manual

ROUTING AND

FIRMWARE UPGRADE

Provide Host Name if Not Specified by Client – when
•
activated, your Gateway assigns a default name to the
client, if the DHCP client has no host name.
Click Apply to save changes.
4.

DHCP CONNECTIONS

You can view a list of the connections currently assigned and
recognized by the DHCP server. In addition, you can add a new
connection with a fixed IP address.
NOTE:
The fixed IP address of a device is assigned to the MAC address of
the network card installed on the network computer. If this network card is
replaced, you must update the device entry in the DHCP Connections list with
the MAC address of the new network card.
To view a list of computers:
On the IP Address page, click Connection List.
1.
To define a new Static Connection with a fixed IP address,
2.
click Add Static Connection.
Enter the host name.
3.
Enter the fixed IP address to be assigned.
4.
Enter the MAC address of the network interface of the
5.
computer used with this DHCP static connection.
Click Apply to save changes.
6.
8.5/
FIRMWARE UPGRADE
You can perform the following functions:
Firmware Upgrade – upgrades using the Internet or a local
•
computer.
Firmware Restore – rollbacks your firmware to a previous version.
•
verizon.com/fios
08 / CONFIGURING
ADVANCED SETTINGS
156
©
| 2014 Verizon. All Rights Reserved.