Mode - Verizon FiOS-G1100 User Manual

802.11

MODE

Select either:
3.
Accept all devices listed below – allows only the listed
•
devices to access the wireless network.
Warning:
This will block wireless network access for all devices
not in the list. Only devices in the list will be able to connect to
the wireless network.
Deny all devices listed below – denies access to the listed
•
devices. All other wireless devices will be able to access
the wireless network if they use the correct wireless
password.
Enter the MAC address of a device, then click Add.
4.
Repeat step 2 to add additional devices, as needed.
5.
To remove a specific device's MAC address, click the Remove
6.
button next to the specific MAC address.
When all changes are complete, click Apply to save changes.
7.
3.5/ 802.11 MODE
From the 802.11 Mode page, you can limit the wireless access to your
network by selecting the 2.4 GHz and 5 GHz wireless communication
standard (mode) best suited or compatible with the devices you allow
access to your wireless network.
To select the 802.11 Mode:
On the Advanced Settings page, locate the Level 3 section
1.
and click the 802.11 Mode link. The 802.11 Mode page
displays.
Select the 2.4 GHz Wireless Mode as follows:
2.
Compatibility – This is the default mode setting,
•
providing a good balance of performance and
compatibility with existing wireless devices. 802.11b, g,
and n devices can connect.
Legacy – For older wireless devices. Only 802.11b and g
•
devices can connect. 802.11b (legacy mode) will cause
your wireless network to slow and is not recommended.
Performance – For newer wireless 802.11n devices only.
•
No other devices can be used.
verizon.com/fios
03 / WIRELESS
SETTINGS
52
©
| 2014 Verizon. All Rights Reserved.