Rule - TP-Link TL-WR841N User Manual

4.11.1

Rule

Choose menu "Access Control → Rule", you can view and set Access Control rules in the
screen as shown in Figure 4-46.
Enable Internet Access Control - Select the check box to enable the Internet Access

Control function, so the Default Filter Policy can take effect.
Rule Name - Here displays the name of the rule and this name is unique.

Host - Here displays the host selected in the corresponding rule.

Target - Here displays the target selected in the corresponding rule.

Schedule - Here displays the schedule selected in the corresponding rule.

Action - Here displays the action the router takes to deal with the packets. It could be Allow

or Deny. Allow means that the router permits the packets to go through the router. Deny
means that the router rejects the packets to go through the router.
Status - This field displays the status of the rule. Enabled means the rule will take effect,

Disabled means the rule will not take effect.
Modify - Here you can edit or delete an existing rule.

To add a new rule, please follow the steps below.
1. Click the Add New... button and the next screen will pop-up as shown in Figure 4-47.
TL-WR841N/TL-WR841ND
Figure 4-46 Access Control Rule Management
-63-
300Mbps Wireless N Router