Dhcp; Dhcp Settings - TP-Link TL-WR841N User Manual

Current Status - The connected wireless station's running status, one of

STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN /
Disconnected
Received Packets - Packets received by the station

Sent Packets - Packets sent by the station

You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to
the next page and click the Previous button to return the previous page.

Note:
This page will be refreshed automatically every 5 seconds.
4.7

DHCP

Figure 4-25 The DHCP menu
There are three submenus under the DHCP menu (shown in
Clients List and Address Reservation. Click any of them, and you will be able to configure the
corresponding function.
4.7.1

DHCP Settings

Choose menu "DHCP→DHCP Settings", you can configure the DHCP Server on the page
(shown in 4-26).The router is set up by default as a DHCP (Dynamic Host Configuration
Figure
Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to
the router on the LAN.
TL-WR841N/TL-WR841ND
-45-
300Mbps Wireless N Router
): DHCP Settings, DHCP
Figure 4-25
STA-AUTH /