Table/Desk And Wall Installation - AT&T 9465 User Manual

9465 book_1ATT 2/29/00
INSTALLATION

Table/Desk and Wall Installation

1 Install the handset battery.
b) Plug battery pack
2 Attach belt clip to the cordless handset (optional).
NOTE: The handset cannot be charged in the face-up position
when the belt clip is attached.
a) Slide
NOTE: Connect power to the base unit before placing the
handset in the cradle.
4
11:23 PM Page 4
a) Remove battery
compartment
cover by pressing
on indentation
and sliding
downward.
connector into handset,
and place battery pack and
wires into compartment.
down into
grooves to
attach.
c) Replace cover
by sliding it
on its track up
over battery
case until it
snaps firmly
into place.
b) Push up
and
away to
remove.