Record A Phone Conversation; Headset Jack; Telephone Operation - AT&T 9465 User Manual

9465 book_1ATT 2/29/00

TELEPHONE OPERATION

AT THE HANDSET

Record a Phone Conversation

Using the handset (not the speakerphone), you can record a phone
conversation up to three minutes long. Listen to the recording as you do
any other message.
NOTE: This unit does not sound warning beeps to let the other party
know that the call is being recorded. To ensure that you are in
compliance with any state and federal regulations that concern
recording a telephone call, you should start the recording process and
then inform the caller that you are recording the call.
Press a, then # at any time during a phone conversation at
1
the handset.
Press 1 or 2 to select in which mailbox the conversation will be
2
recorded. The system beeps and begins recording.
To stop recording, press 5.
3

Headset Jack

You can use this telephone hands-free when you install an AT&T 2.5 mm
headset (purchased separately).
1
Plug the headset into the jack located on the left side of the handset.
Do not force the connection, but make sure the plug fits securely.
2
Follow the instructions under "Make,Answer, or End a Call" on
page 17.
3
If you wish, attach the belt clip (see page 4 in the INSTALLATION
section of this manual).
NOTE: The earpiece and
microphone on the handset are
disabled when the headset is
plugged in.
20
11:23 PM Page 20
L1 L2