Table/Desk Installation - AT&T 9230 User Manual

Table/Desk Installation

Standard
electrical
outlet
3 Charge the handset battery.
Place the handset in the base. Charge the battery for at least 24 hours
the first time.
4 Check for dial tone.
After the batteries are charged, pick up the handset and press P;
you should hear a dial tone.
5 Set the dial mode.
If you have touch tone service, the phone is ready to use as soon as the
batteries are charged.
If you have dial pulse (rotary) service, you'll need to change the dial
mode.
• Make sure the phone is off.
Press G on the handset until the screen displays
•
DIAL TYPE: and the currently selected mode.
Press > to select TONE or PULSE.
•
• Press to save the displayed mode.
INSTALLATION
Modular
telephone
1 Connect the
telephone
line cord.
2 Connect the
power cord.
jack
Use only the power
cord supplied with
this product. If you
need a replacement,
call 1 800 222-3111
5