Kyocera Ecosys P4040dn Operation Manual page 147

Buzzer:
01 Key Confirmation
Job Finish
02
Ready
03
Key Confirmation (Key confirmation tone setting)
When On is selected in this setting, a tone sounds each time a key is used. The default setting is On.
Key Confirmation:
01 Off
* On
02
Job Finish (Job completed tone setting)
When On is selected in this setting, a tone sounds when printing ends. The default setting is Off.
Job Finish:
01 * Off
02 On
Ready (Preparation completed tone setting)
When On is selected in this setting, a tone sounds when print preparation has been completed. The default setting is Off.
Ready:
* Off
01
02 On
2
Press [OK]. The Buzzer screen appears.
Exit
1
In the Buzzer menu screen, press  or  to select Key
Confirmation.
2
Press [OK]. The Key Confirmation screen appears.
3
Press  or  to select whether the key confirmation tone is enabled.
4
Press [OK]. The key confirmation tone setting is set and the Buzzer
menu reappears.
1
In the Buzzer menu screen, press  or  to select Job Finish.
2
Press [OK]. The Job Finish screen appears.
3
Press  or  to select whether the printing completed tone is
enabled.
4
Press [OK]. The printing completed tone setting is set and the
Buzzer menu reappears.
1
In the Buzzer menu screen, press  or  to select Ready.
2
Press [OK]. The Ready screen appears.
3
Press  or  to select whether the preparation completed tone is
enabled.
4
Press [OK]. The preparation completed tone setting is set and the
Buzzer menu reappears.
4-81
Operation Panel