Kyocera Ecosys P4040dn Operation Manual page 134

PIN (Device) (Connect using a PIN code (for the Wireless Network Interface Kit))
The connection is started using the PIN code for the machine. The PIN code displayed should be entered at the access
point. The PIN code for the machine is generated automatically.
Enter the PIN code
into the access point
and press [Next].
PIN:xxxxxxxx
PIN code
PIN (Terminal) (Connect using a PIN code (for the access point))
The connection is started using the PIN code for the access point. Enter the PIN code for the access point. For details of
the PIN code for the access point, refer to the Operation Guide of the access point.
PIN Code:
Custom Setup (Detailed settings for the wireless network)
It is possible to change the detailed settings of the wireless network.
3
Press the automatic wireless network setup button on the access
point.
4
Press [Next] ([Right Select]). The message Connecting...
appears and the connection with the access point starts.
1
In the Quick Setup menu, press  or  to select PIN (Device).
2
Press [OK]. A PIN code is displayed on the Message display.
Next
3
Write down the PIN code displayed on the Message display.
4
Press [Next] ([Right Select]). The message Connecting...
appears.
5
At the access point, immediately enter the PIN code which wrote
down on step 3. The connection with the access point starts.
1
In the Quick Setup menu, press  or  to select PIN
(Terminal).
2
Press [OK]. The PIN code entry screen appears.
ABC
Text
3
Enter the PIN Code using the numeric keys.
4
Press [OK]. The message Connecting... appears and the
connection with the access point starts.
1
In the Wireless Network menu, press  or  to select Custom
Setup.
Note Up to 8 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-2.
4-68
Operation Panel