Table of Contents
Advertisement
For more information about using Swype and its additional capabilities, including using voice entry
and personalizing your Swype dictionary, touch and hold
then touch How to Swype. You can also visit swype.com for more information.
TouchPal Keyboard
TouchPal Keyboard offers three layouts, Full QWERTY, 12-Key PhonePad and CooTek T+. You
can swipe left or right on the TouchPal keyboard to switch the layout.
You can also use TouchPal Curve
with a tracing gesture where you can move your finger from letter to letter without lifting the finger
until you reach the end of the word.
To switch the keyboard layout:
1. Touch
> > Settings > Language & input > (TouchPal Keyboard) >
Keyboard layout.
2. Check Swipe layout.
3. In the TouchPal keyboard screen, touch
4. Swipe left or right on the TouchPal keyboard to select the Full QWERTY, 12-Key PhonePad or
CooTek T+ layout.
Full QWERTY
Touch the alphabetic keys to enter letters.
n
Touch and hold an alphabetic key to enter the number or symbol indicated on the bottom of the
n
key; touch and hold an alphabetic key and then slide to
for the key.
Touch
to use uppercase or lowercase. This key also changes to indicate the current case
n
you are using:
Slide right on
n
Phone Basics
TM
to speed up text input by replacing the key tapping operation
for lowercase,
for uppercase, and
to enable word prediction. Slide left on
from the Swype keyboard display and
and uncheck Curve, and then touch Close.
to customize the number or symbol
when locked in uppercase.
to disable word prediction.
24
Advertisement
Table of Contents
