Dell 2130cn User Manual page 155

Values:
Plain Sets the temperature settings for the fuser for plain paper within the range of -6 to 6.
Plain Thick Sets the temperature settings for the fuser for thick plain paper within the range of -6 to 6.
Transparency Sets the temperature settings for the fuser for transparencies within the range of -6 to 6.
Covers Sets the temperature settings for the fuser for cover paper within the range of -6 to 6.
Covers Thick Sets the temperature settings for the fuser for thick cover paper within the range of -6 to 6.
Label Sets the temperature settings for the fuser for labels within the range of -6 to 6.
Coated Sets the temperature settings for the fuser for coated paper within the range of -6 to 6.
Coated Thick Sets the temperature settings for the fuser for thick coated paper within the range of -6 to 6.
Envelope Sets the temperature settings for the fuser for envelopes within the range of -6 to 6.
Recycled Sets the temperature settings for the fuser for recycled paper within the range of -6 to 6.
Auto Registration Adjustment
Purpose:
To specify whether to automatically perform color registration adjustment.
Color Registration Adjustments
Purpose:
To specify whether to manually perform color registration adjustment.
Manual Color Registration Adjustments are required such as after the printer is moved.
NOTE: The Color Registration Adjustments feature can be configured when Auto Registration Adjustment is set to Off.
Values:
Auto
Click Start to Automatically performs color registration correction.
Correct
Click Start to print a color registration chart. The color registration chart prints a lattice pattern of yellow, magenta, and cyan lines. On the chart,
Color Regi find the values on the right side that are next to the straightest lines for each of the three colors. If the value for the straightest line is 0, color
Chart registration adjustment is not required. If the value for the straightest line is any value other than 0, specify the adjustment values under Color
Registration Adjustments.
Enter Specifies fast scan (perpendicular to paper feed direction) and slow scan (paper feed direction) color adjustment values individually for Yellow,
Number Magenta, and Cyan within the range of -9 to 9.
Clean Developer
Purpose:
To clean each toner cartridge or PHD unit, or to stir toner in a new toner cartridge.
Values:
Clean Developer
Yellow Toner Refresh
Magenta Toner Refresh Cleans the toner in the magenta toner cartridge.
Cyan Toner Refresh
Black Toner Refresh
Drum Refresh
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are performed by specifying the altitude of the
location where the printer is being used.
Reset Defaults
Downloaded from ManualsPrinter.com Manuals
Stirs toner in a new toner cartridge.
Cleans the toner in the yellow toner cartridge.
Cleans the toner in the cyan toner cartridge.
Cleans the toner in the black toner cartridge.
Cleans the surface of the PHD unit.