Dell 2130cn User Manual page 30

To initialize wireless network settings. After executing this function and rebooting the printer, all wireless network settings are reset to their default values.
NOTE: This item is only displayed when an optional wireless printer adapter is installed.
TCP/IP
Purpose:
To configure TCP/IP settings. Any changes made become effective after the printer is turned off and then on.
Values:
Dual Stack*
IP Mode
IPv4 Mode
IPv6 Mode
Get IP Address
IPv4
IP Address
Subnet Mask
Gateway Address
1
IPsec*
1
* Only displayed when an optional network protocol adapter is installed and IPsec is enabled.
Protocol
Purpose:
To enable or disable each protocol. Any changes made become effective after the printer is turned off and then on.
Values:
LPD
Port9100
1
NetWare IP
NetWare*
1
WSD*
SNMP SNMP UDP
E-Mail Alert
EWS
2
HTTP-SSL/TLS*
1
* Only displayed when an optional network protocol adapter is installed.
2
* Only displayed when an optional network protocol adapter is installed and which is authenticated by EWS.
IP Filter
Purpose:
Downloaded from ManualsPrinter.com Manuals
Uses both IPv4 and IPv6 to set the IP address.
Uses IPv4 to set the IP address.
Uses IPv6 to set the IP address.
AutoIP* Automatically sets the IP address.
BOOTP Uses BOOTP to set the IP address.
RARP Uses RARP to set the IP address.
DHCP Uses DHCP to set the IP address.
Panel Enables the IP address entered on the operator panel.
Sets the IP address allocated to the printer by using the keys on the operator panel.
Sets the subnet mask.
Sets the gateway address.
Disables IPsec.
Enable* Enables the LPD port.
Disable Disables the LPD port.
Enable* Enables the Port9100 port.
Disable Disables the Port9100 port.
Enable* Uses IP for NetWare.
Disable Does not use IP for NetWare.
Enable* Enables the WSD port.
Disable Disables the WSD port.
Enable* Enables the UDP.
Disable Disables the UDP.
Enable* Enables the Email Alerts feature.
Disable Disables the Email Alerts feature.
Enable* Enables an access to Dell Printer Configuration Web Tool embedded in the printer.
Disable Disables an access to Dell Printer Configuration Web Tool embedded in the printer.
Enable* Enable the HTTP-SSL/TLS.
Disable Disable the HTTP-SSL/TLS.