Edit Numbers Stored In Memory - AT&T 9357 User Manual

9357_book/wc_1ATT 7/6/01
When you finish entering the name, press s. The screen
4
displays ENTER NUMBER.
Enter the telephone number. Use < to backspace and make
5
a correction. Press r to store a pause in the dialing
sequence.
Press s to store your entry. The screen displays SAVING...
6
and you'll hear a series of beeps confirming the entry.
Note: When memory is full the screen displays MEMORY FULL, an error
tone sounds, and you will not be able to store a new number until you
delete a stored number.

Edit Numbers Stored in Memory

Press > (DIR). The screen displays DIRECTORY.
1
Press < or > to scroll alphabetically through numbers
2
stored in memory
—OR—
Press the dial pad key for the first letter of the entry you
want to edit.
When the screen displays the number you want to edit, press s.
3
Then press < or > until EDIT flashes.
DIAL E E D D I I T T ERASE
973-555-0123
5/01 5:40
Press s. The screen displays the name and number. The flashing
4
cursor appears at the end of the name. Use <, > and the dial
pad keys to edit the name. Press s to move on to edit the
number.
Press s to save the edited information. You'll hear a series of
5
beeps confirming the change.
4:10 PM Page 11
TELEPHONE MEMORY
28
PM OLD
11