Using Disc Title Functions - Pioneer DEH-P3000IB Operation Manual

Section
C_O_p_e_r_a_ti_n_g_t __ h _is_u_n_it
~)
GIl
2 Press MULTI-CONTROL to display the
setting mode.
3 Use MULTI-CONTROL to select the de-
sired setting.
Turn to change the setting.
OFF-COMP 1-COMP 2-0FF-BMX 1-
BMX2
Using disc title functions
You can input CD titles and display the title.
The next time you insert a CD for which you
have entered a title, the title of that CD is dis-
played.
Entering disc titles
Use the disc title input feature to store up to
48 CD titles in the unit. Each title can be up to
10 characters long.
1 Play the CD that you want to enter a
title for.
2 Use MULTI-CONTROL to select
TITLE INPUT in the function menu.
3 Press MULTI-CONTROL to display the
title input mode.
4 Turn MULTI-CONTROL to select a letter
of the alphabet.
• You can also perform the same operations by
pushing
MULTI-CONTROL
up or down.
5 Press MULTI-CONTROL to move the cur-
sor to the next character position.
6 After entering the title. press and hold
MULTI-CONTROL to store it in memory.
BNotes
• Titles remain in memory, even after the disc is
removed from the unit, and are recalled when
the disc is reinserted.
• After data for 48 discs are stored in the mem-
ory, data for a new disc overwrites the oldest
one.
• If you connect a multi-CD player, you can
input disc titles for up to 100 discs.
• When a multi-CD player that does not support
disc title functions is connected, you cannot
enter disc titles in this unit.
(!J
m
:::s
(Q
(ii'
:::s"
En
GD