Detailed Setting Of The Video Format - Sony F23 Operation Manual

3-13 Detailed Setting of
the Video Format
You can select various video formats according to that of
the video recorder used in combination.
Available formats
Frame rate Signal
format
23.98PsF 4:2:2 YCbCr
4:4:4 RGB
S23.98PsF 4:2:2 YCbCr
4:4:4 RGB
24PsF 4:2:2 YCbCr
4:4:4 RGB
S24PsF 4:2:2 YCbCr
4:4:4 RGB
25PsF 4:2:2 YCbCr
4:4:4 RGB
S25PsF 4:2:2 YCbCr
4:4:4 RGB
S30PsF 4:2:2 YCbCr
4:4:4 RGB
29.97PsF 4:2:2 YCbCr
4:4:4 RGB
1) Selectable only when the HKSR-102 Picture Cache Board and the HKSR-
103 RGB 60P Processor Board are mounted in the SRW-1. Outputs from
the HD-SDI A/B connectors of the interface box are turned off.
You can confirm the format being selected on the
FUNCTION display (page 47).
Any eight of above formats of highest need can be
registered to be selected on the subdisplay.
For format selection on the subdisplay, see "3-2-4
Selection of Video Formats" (page 33).
Using the <OUTPUT FORMAT> page of the
MAINTENANCE menu enables selection of the mainly
used format in interface with the SRW-1 HD Portable
Digital Recorder.
Frame frequency of 23.98PsF and signal format of 4:4:4
RGB have been selected at the factory.
Changing the format
Referring to the procedure mentioned in "2-9 Setting the
Built-in Clock" (page 27), select MAINTENANCE menu
Frame rate Signal
format
S29.97PsF 4:2:2 YCbCr
4:4:4 RGB
50P 4:2:2 YCbCr
S50P 4:2:2 YCbCr
1)
4:4:4 RGB
59.94P 4:2:2 YCbCr
S59.94P 4:2:2 YCbCr
1)
4:4:4 RGB
59.94I 4:2:2 YCbCr
4:4:4 RGB
50I 4:2:2 YCbCr
4:4:4 RGB
S60P 4:2:2 YCbCr
1)
4:4:4 RGB
on the TOP MENU screen and call up the <OUTPUT
FORMAT> page.
For details on menu operations, see "4-2 Basic Menu
Operations" (page 59).
<OUTPUT FORMAT> page of MAINTENANCE
menu
< O U T P U T F O R M A T >
C U R R E N T 2 3 . 9 8 P s F 4 : 4 : 4
N E X T
S C A N :
F R A M E : 2 3 . 9 8
S I G N A L : 4 : 4 : 4 R G B
S E L E C T F P S : O F F
S E T R O R M A T
CURRENT
The current format is displayed.
Specify the desired format, using the lines under NEXT.
SCAN
Select the scan mode: PROGRESSIVE or INTERLACE.
FRAME
Select the frame rate. When you select INTERLACE for
the scan mode, select 29.97 to specify 59.94I or select 25
to specify 50I.
SIGNAL
Select the signal format.
SELECT FPS
Set to ON to use the Select FPS function.
For details on the Select FPS function, refer to the
Operation Manual of the SRW-1 HD Portable Digital
Recorder.
When the settings are completed, position the pointer at
SET FORMAT and push on the MENU SEL/ENTER dial.
The format is changed, and the new format is displayed on
the CURRENT line.
Notes
• If you select the format in invalid combination (e.g., 60P
and 4:4:4), SET FORMAT is displayed in parentheses,
and the format cannot be changed.
• If the recorder refuses the format change by the above
procedure, the message "UNSUPPORTED FORMAT"
is displayed for three seconds.

Detailed Setting of the Video Format

M 0 8 T O P
c P R O G R E S S I V E
57