Spare Battery Charger - AT&T 9351 User Manual

9351_book_2ATT 1/1/01

Spare Battery Charger

This phone is equipped with a built-in spare battery charger in the base
unit. The spare battery charger allows you to always have a charged
battery available should the handset battery charge become low.
To install the spare battery pack (purchased separately,
Replacement Battery #3301, AT&T SKU# 91076):
1
Open the base unit spare battery compartment.
2
Plug battery pack
connector into base.
Place the spare
battery pack in the
compartment.
3 Replace the spare battery compartment cover.
4
When the battery is installed properly, the SPARE BATTERY light on the
base will be on.
5
The spare battery will be fully charged after 24 hours.
3:33 PM Page 21
Spare battery
compartment
cover
BATTERIES
Spare battery
compartment
21