Set-Up; Inserting The Needle - Pfaff 2081 Instruction Manual

Set-up

9 Set-up
9

Inserting the needle

.01
24
Observe and comply with all regulations and instructions in this instruction
manual. Pay particular attention to all safety regulations!
All set-up work may only be carried out by appropriately instructed personnel.
Disconnect the machine from the electricity mains for all set-up work by
operating the main switch or by removing the mains plug!
2
Fig. 9 - 01
1
● Raise the needle bar.
● Loosen the screw 1 and insert the
needle 2 until you feel it stop.
The long groove must point to the left.
● Tighten the screw 1
Switch off the machine!
Risk of injury due to accidental
machine start-up!
Only use needles of the system
intended for the machine, see
Chapter 3 Technical Data!