Activation And Service; Create Your Account And Pick Your Plan - Sharp aquos crystal User Manual

Insert the USB plug into the AC adapter and then insert the micro USB plug into the
l
charger/accessory jack on your phone.
Plug the AC adapter into a standard electrical outlet.
l
Note: Your phone's battery should have enough charge for the phone to turn on and find a signal, run the
setup application, set up voicemail, and make a call. You should fully charge the battery as soon as possible.
2. Press and hold the Power/Lock Button to turn the phone on.
If your phone is activated, it will turn on, search for service, and begin the setup process.
l
If your phone is not yet activated, see Activate Your Phone for more information.
l

Activation and Service

Before using your phone, you must set up your service with Boost Mobile. You will need your
phone's serial number (MEID), which can be found on the bottom panel of the phone's package.

Create Your Account and Pick Your Plan

Set up your Boost Mobile account.
1. From your computer, visit boostmobile.com/activate.
2. Enter your phone's MEID and click start activation process.
Your phone's MEID (serial number) can be found on the bottom panel of the phone's
l
package.
3. Follow the remaining instructions to choose your plan and select a payment method.
4. Follow the activation instructions below and you'll be able to start using your phone.
Note: You can also activate by phone by calling 1-888-BOOST-4U (1-888-266-7848) from any other phone.
Get Started 2