Yamaha FT50C Service Manual page 149

5. Install the Woodruff key A into the drive
shaft.
6. Align the groove on the impeller 0 with
the Woodruff key A, and then install it to
the drive shaft.
7. Install the insert plate cartridge B and
grommet C into the pump housing D.
62Y5A11
Water pump and shift rod
A
NOTE:
Align the insert plate cartridge projection c
with the hole d in the pump housing.
8. Install the new gasket E, pump housing
assembly D, and dowel pins F to the
lower case.
9. Install and tighten the bolts G.
NOTE:
When installing the pump housing, apply
grease to the inside of the housing, and then
turn the drive shaft clockwise while pushing
down the pump housing.
1
2
S62Y6580K
3
4
5
A A
6
7
8
S62Y6585K
9
6-10