Table of Contents
Advertisement
Mobility
3.
Remove the cover from one side, arrow 3.
4.
Press the four fasteners and remove the
cover.
Attaching the covers
1.
When attaching the cover, make sure that
all four fasteners are engaged.
2.
Attach the cover under the rubber lip and
then thread it between the bars.
3.
Press down on the holder and tighten the
three screws.
In the trunk
Fold up the cargo floor panel.
220
Replacing components
Online Edition for Part no. 01 40 2 960 574 - II/15
The fuses are located under a cover. To open
the cover, reach into the recessed grip on the
side and fold the cover open.
Information on the fuse types and locations is
found on a separate sheet.
After initial use, insert the sheet in the holding
fixture on the inside of the cover.
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Table of Contents
