Table of Contents
Advertisement
21-watt bulb, PY21W
1.
In the wheel house, loosen the two brack‐
ets and remove the cover.
2.
If necessary, pull the inside trim of the
wheel house slightly inward. Turn the bulb
socket counterclockwise and remove.
3.
Press the bulb gently into the socket, turn
counterclockwise and remove.
4.
Install the new bulb and bulb holder in re‐
verse order of removal.
5.
Attach the cover to the wheel house.
Front fog lights
Follow general instructions, refer to page 210.
35-watt bulb, H8.
1.
Use the handle of the screwdriver from the
onboard vehicle tool kit to remove the
three wheel house panel screws, arrow 1.
I n f o r ma t i o n P r o v i d e d b y :
Online Edition for Part no. 01 40 2 960 574 - II/15
Replacing components
Carefully pull back the wheel house panel,
arrow 2.
2.
Pull off the bulb connector, arrow 1.
Turn the bulb, arrow 2.
Left side of vehicle: turn clockwise.
Right side of vehicle: turn counterclock‐
wise.
Remove the bulb.
3.
Insert the new bulb, connect the connector
and screw on the wheel house panel.
Turn signal in exterior mirror
Follow general instructions, refer to page 210.
The turn signals in the exterior mirrors feature
LED technology. Contact your service center
in the event of a malfunction.
Mobility
215
Advertisement
Table of Contents
