Table of Contents
Advertisement
Mobility
into the tires, which seals the damage from the
inside.
The compressor can be used to check the tire
inflation pressure.
Hints
▷
Follow the instructions on using the Mobi‐
lity System found on the compressor and
sealant container.
▷
Use of the Mobility System may be ineffec‐
tive if the tire puncture measures approx.
1/8 in/4 mm or more.
▷
Contact the nearest service center if the
tire cannot be made drivable.
▷
If possible, do not remove foreign bodies
that have penetrated the tire.
▷
Pull the speed limit sticker off the sealant
container and apply it to the steering
wheel.
▷
The use of a sealant can damage the TPM
wheel electronics. In this case, have the
electronics checked at the next opportu‐
nity and have them replaced if needed.
Enclosed areas
Do not let the engine run in enclosed
areas, since breathing in exhaust fumes may
lead to loss of consciousness and death. The
exhaust gases contain carbon monoxide, an
odorless and colorless but highly toxic gas.◀
Storage
The Mobility System is located under the
cargo floor panel.
198
Wheels and tires
Online Edition for Part no. 01 40 2 960 574 - II/15
Sealing container
▷
Sealing container, arrow 1.
▷
Filling hose, arrow 2.
Observe use-by date on the sealant container.
Compressor
1
On/off reel
2
Holder for bottle
3
Reduce inflation pressure
4
Inflation pressure dial
5
Compressor
6
Connector/cable for socket
7
Connection hose — stowed in the bottom
of the compressor
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Table of Contents
