Zanussi ZDT15002 User Manual page 8

2. Press the on/off button to activate the appliance.
Make sure that the appliance is in setting mode. Refer
to 'SETTING AND STARTING A PROGRAMME'.
• If the salt indicator is on, fill the salt container.
• If the rinse aid indicator is on, fill the rinse aid dis-
penser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for the type of
load and soil.
Loading the baskets
Refer to the supplied leaflet with examples of the
load of the baskets.
• Only use the appliance to wash items that are dish-
washer-safe.
• Do not put in the appliance items made of wood, horn,
aluminium, pewter and copper.
• Do not put in the appliance items that can absorb water
(sponges, household cloths).
• Remove remaining food from the items.
• Make soft the remaining burned food on the items.
• Put hollow items (cups, glasses and pans) with the
opening down.
• Make sure that cutlery and dishes do not bond togeth-
er. Mix spoons with other cutlery.
• Make sure that glasses do not touch other glasses.
• Put small items in the cutlery basket.
• Put light items in the upper basket. Make sure that the
items do not move.
• Make sure that the spray arms can move freely before
you start a programme.
Using the detergent
Caution! Use only detergents for dishwashers.
Do not use more than the correct quantity of deter-
gent. Refer to the instructions on the detergent
packaging.
8
1
A
3
Put the detergent or the
tablet in compartment (A).
B
If the programme has a
prewash phase, put a
small quantity of detergent
in compartment (B).
Detergent tablets do not fully dissolve with short
programmes and detergent residues can stay on the
dishes.
We recommend that you use detergent tablets with long
programmes.
Combi detergent tablets
These tablets contain detergent, rinse aid and other added
agents. Be sure that these tablets are applicable to the wa-
ter hardness in your area. Refer to the instructions on the
packaging of the products.
When you use tablets, that contain salt and rinse aid, do
not fill the salt container and the rinse aid dispenser. The
rinse aid indicator always comes on if the rinse aid dis-
penser is empty.
2
A
4