Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZDF3023
Summary of Contents for Zanussi ZDF3023
- Page 1 User manual Dishwasher ZDF3023...
-
Page 2: Table Of Contents
Water connection has a 13 amp mains plug. If it is necessary to • Make sure not to cause damage to the water change the fuse in the mains plug, use a 13 hoses. amp ASTA (BS 1362) fuse. www.zanussi.com... -
Page 3: Product Description
There can PNC : be detergent on the dishes. Serial Number : Product description Worktop Lower spray arm Filters Rating plate Rinse aid dispenser Detergent dispenser Salt container Water hardness dial Upper spray arm Upper basket www.zanussi.com... -
Page 4: Control Panel
80 - 90 1.6 - 1.8 22 - 24 Crockery, cutlery, Wash 70 °C pots and pans Rinses Normal soil Prewash 155 - 167 0.99 - 1.04 12.2 - 13 Crockery and cut- Wash 50 °C lery Rinses Prewash www.zanussi.com... -
Page 5: Options
2. Make sure that the appliance is in setting 5. Adjust the water softener to the water hard- mode. Refer to ‘SETTING AND STARTING ness in your area. A PROGRAMME'. 6. Adjust the released quantity of rinse aid. 3. Press Multitab, the Multitab indicator comes on. www.zanussi.com... -
Page 6: Before First Use
19 - 25 1.9 - 2.5 13 - 17 4 - 10 7 - 18 0.7 - 1.8 5 - 12 < 4 < 7 < 0.7 < 5 1) Factory position. 2) Do not use salt at this level. www.zanussi.com... - Page 7 Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme. www.zanussi.com...
-
Page 8: Daily Use
• Only use the appliance to wash items that are dishwasher-safe. Do not use more than the correct quantity • Do not put in the appliance items made of of detergent. Refer to the instructions on wood, horn, aluminium, pewter and copper. the detergent packaging. www.zanussi.com... - Page 9 The countdown starts to decrease with steps of 1 hour. The appliance must be in setting mode to: • The phase indicators of the set pro- Start a programme. • gramme go off. • Set the level of the water softener. www.zanussi.com...
-
Page 10: Care And Cleaning
Care and cleaning Cleaning the filters Warning! Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. Dirty filters and clogged spray arms de- crease the washing results. Make a check regularly and, if necessary, clean them. www.zanussi.com... -
Page 11: Troubleshooting
With some problems, the display shows with the off position. an alarm code: • - The appliance does not fill with water. • - The appliance does not drain the wa- ter. www.zanussi.com... - Page 12 Incorrect position of the items in the Make sure that the position of the baskets. Water could not wash all items in the baskets is correct and that items. the water can easily wash all items. www.zanussi.com...
- Page 13 The appliance must be in setting mode. 2. Press and hold Start. At the same time turn Refer to ‘SETTING AND STARTING A the programme knob counterclockwise until PROGRAMME’. the programme marker is aligned with the first programme on the control panel. www.zanussi.com...
-
Page 14: Technical Information
Remove the worktop of the appliance to install Warning! Refer to “SAFETY it under a sink unit or a kitchen counter. INFORMATION”. Installation under a kitchen counter Put the appliance adjacent to a water tap and a water drain. www.zanussi.com... - Page 15 With a correct level the appliance door closes and seals correctly. Install the appliance worktop to the appliance if you want to use the dishwasher as a freestand- ing appliance. The plinth on freestanding appliance is not ad- justable. www.zanussi.com...
- Page 16 www.zanussi.com/shop...