Operation - Bosch LTC 2814/90 Series Instruction Manual

LTC 2814/90 Series | Instruction Manual | Operation
4

OPERATION

Control/Switch
VOLUME control (FIGURE 1 item - 1)
SHARPNESS control (FIGURE 1 item - 2)
CONTRAST control (FIGURE 1 item - 3)
BRIGHTNESS control (FIGURE 1 item - 4) Adjust the BRIGHTNESS control for the desired overall picture or display brightness.
COLOR control (FIGURE 1 item - 5)
TINT control - only applicable for NTSC
(FIGURE 1 item - 6)
Composite Video-Y/C Switch (FIGURE 1
item - 7)
Video A/B Switch (FIGURE 1 item - 8)
Power on/off Switch (FIGURE 1 item - 9)
Bosch Security Systems | 22 June 2004
Function
Adjust the VOLUME control to the appropriate audio level.
Turn clockwise to increase sound, and counterclockwise to decrease it.
If the audio input is not used, turn to minimum.
Adjust the SHARPNESS control for the desired overall sharpness. Turn clockwise to increase
picture sharpness, and counterclockwise to decrease it.
Adjust the CONTRAST control to the desired overall contrast.
Turn clockwise to increase picture contrast, and counterclockwise to decrease it.
Turn clockwise for more brightness, and counterclockwise for less.
Adjust the COLOR control to set the color (saturation) level.
When turned counterclockwise, the color seems pale (low color).
When turned clockwise, the color seems saturated (high color).
Adjust the TINT control for proper color phase or flesh tone.
When turned counterclockwise, skin tone becomes reddish.
When turned clockwise, skin tone becomes greenish.
NOTE: There is no TINT control in PAL display.
Set the switch to Composite Video or Y/C for the connected video input option.
- Composite Video, when monitoring a composite signal.
- Y/C, when monitoring a Y/C signal.
The INPUT INDICATOR (Y/C) illuminates when the desired video input is selected.
Set the switch to A (video A in) or B (video B in) when the Composite Video option is selected.
- A, when monitoring the composite video A signal.
- B, when monitoring the composite video B signal.
The Input Indicator (A;B) illuminates when the desired video input is selected
Press the switch to turn the monitor ON. (The INPUT INDICATOR illuminates.)
Press the switch again to turn the monitor OFF.
EN | 9