Centre Rails - Viessmann vitocrossal 300 Installation Instructions Manual

Fitting the thermal insulation

Centre rails

1.
5.
1. Secure the wing screws to the top
and bottom boiler rails.
2. Hook the centre rail into the wing
screws and loosely tighten by hand.
3. Hook the bottom of the side panels on
both sides into the boiler.
(cont.)
1.
5.
4. If necessary, align the rails so that the
gap between both side panels runs
parallel.
5. Secure the centre rails.
6. Remove the bottom of the side pan-
els from both sides of the boiler.
3.
6.
4.
2.
13