Automatic Feeder Cleaning - Canon imageRUNNER Advance 4251 Basic Operation Gude

Automatic Feeder Cleaning

If your originals have black streaks or appear dirty after scanning them through the feeder, perform an automatic feeder
cleaning for the rollers of the feeder.
1
Press (Settings/Registration).
Press [Adjustment/Maintenance]  [Maintenance]  [Clean Feeder].
2
Place 10 sheets of blank paper into the feeder  press [Start].
3
It takes approximately 15 seconds to clean the feeder.
Use normal LTR size paper.
When cleaning is complete, try scanning again.
Feeder Cleaning cannot be performed during printing.
To cancel feeder cleaning while it is in progress, press [Cancel].
102