Sending Scanned Data (E-Mail/Fax/I-Fax/File Servers) - Canon imageRUNNER Advance 4251 Basic Operation Gude

Sending Scanned Data (E-Mail/Fax/I-Fax/File Servers)

This section describes the fl ow of basic scan and send operations.
Depending on the fi le format, optional products are required to use the Scan function.
1
Placing Originals
Place the original on the feeder or the platen glass.
Placing originals in the feeder
Adjust the slide guides to fi t the size of your originals. Neatly place
your originals with the side to be copied face up.
Placing originals on the platen glass
Open the feeder/platen cover.
Place your originals face down.
Gently close the feeder/platen cover.
• If a log in screen for Department ID Management or SSO-H appears, you must enter the applicable authentication information (ID, password/
PIN). If the Copy Card Reader-F1 is attached, fi rst insert a control card.
• If a login service, such as Department ID Management or SSO-H has been set, press
• The send settings for the last send job may be retained.
- To cancel the settings, press
- The specifi ed destinations are not retained.
36
2
(Reset).
Selecting Function
Select [Scan and Send] from the Main Menu screen.
Press [Scan and Send].
Scan and Send Basic Features screen is displayed.
You can set various send functions. For more
information, see from p. 38 to p. 41 in this manual.
(Log In/Out) to log out.