Disassembling Keypad Card And Digital Control Knob; Disassembling Keypad Card And Focus Control Knob - Saeco Syntia Service Manual

SYNTIA

7.3.1 Disassembling Keypad card and Digital Control Knob

1

7.3.2 Disassembling Keypad card and Focus Control Knob

1
1) Remove the display frame by lifting it and slip off the
upper cover
2) Slip off the flat cable and loosen the highlighted screw
3) Loosen the highlighted screws and remove the elastic
washer
Saeco International Group
3
5
7
2
1) Unscrew the screw shown, remove
the lid, glass, frame, keypad and seal
2) Release the display support
2
3) Unscrew the screws shown and
remove the spring washer
4) Parts
4
5) Release the control knob circuit board
6
6) Release the display
7) Release the keypad circuit board and
disconnect the display
3
4) Display and interface cards as
Rev.01 February 2010
07 DISASSEMBLY
4
sembly
03
Page 03 / 09