Status Indicators And Messages For The Vvx Camera - Polycom VVX 101 User Manual

Polycom VVX Business Media Phones User Guide
To use the privacy shutter:
» On the side of the camera lens, rotate the Privacy Shutter Adjuster from the left to the right.

Status Indicators and Messages for the VVX Camera

This section includes the status indicators and messages that display on your phone for the VVX Camera
connected to your VVX 500 or VVX 600 phone.
VVX Camera LED Indicators
LED State
No LED
Flashes red and green
Flashes amber and green
Flashes green
Green
Amber
VVX Camera Messages
Message
VVX Camera attached. Firmware sync in progress, do
not remove camera.
VVX Camera firmware sync complete. Camera ready.
VVX Camera firmware sync complete. Contact
administrator to enable video.
VVX Camera firmware sync complete. Camera
rebooting.
Polycom, Inc.
Phone State
One of the following:
• Phone has no power
• Camera shutter is closed
Camera is booting up
Camera firmware is updating
Incoming video call
Video call is connected
One of the following:
• Incoming call (no video or audio-only)
• Outgoing call
• Audio call is connected
• Video is muted
• Held call
• Camera shutter is open, but video is not enabled and
camera is not selected
Action
Your camera is upgrading. Do not remove your camera
during this process. The upgrade is complete when you
receive a message stating that either "firmware sync
complete" or "upgrade failed".
Indicates that your camera is ready to use.
Indicates that your camera is ready to use. However,
your phone is not enabled to send and receive video.
Contact your system administrator to enable video calls.
Indicates that the camera firmware sync is finished, and
your camera is in the process of rebooting.
112