Handling A Mixture Of Video And Audio-Only Calls; Place Audio-Only Calls - Polycom VVX 101 User Manual

Hide thumbs Also See for VVX 101:
Table of Contents

Advertisement

Polycom VVX Business Media Phones User Guide

Handling a Mixture of Video and Audio-Only Calls

When you have multiple calls, you can easily manage a video call from the Calls screen. From the Calls
screen, you can quickly identify the video call by the video stream that is displayed next to the call details,
as shown next.
Video calls on the Calls screen
If two or more calls are video calls, only the active call shows a video stream of the far side. All other video
calls show a paused grayscale image of the far side. If you resume a held video call, the held call becomes
active and displays an active video stream again.

Place Audio-Only Calls

Your system administrator can determine how your phone handles audio and video. You can change the
settings on your phone to handle audio and video calls in one of the following ways:
● Video-enabled All calls you place or answer are video calls. This means that the person you call
sees your video on his or her phone, and you see video on your phone from the other person on the
call.
● Audio only All calls are audio only and do not display video information. Your phone screen does
not display video in the Active Call screen, and you do not have the option to send video. If the person
you call sends video, you do not see them.
● Video and Audio You have the option to choose a call mode, either video or audio-only. If this option
is set up on your phone, you can choose the call mode on a call-by-call basis, as well as choose a
mode to apply to all the calls you place.
To choose audio-only for all your calls:
1 Navigate to Settings > Basic > Video > Video Call Settings.
On VVX 1500 phones, navigate to Menu > Settings > Basic > Video > Video Call Settings.
2 From the Video Call Settings screen, select Default Call Mode, and select Audio Only.
The mode you choose applies to your next call and all subsequent calls.
Placing audio-only calls applies to SIP calls only. This feature is not available for H.323 calls. See the section
Use H.323 Protocol to Place Audio Calls
Polycom, Inc.
for more information.
123

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents