Replacing the keyboard
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Adhere the Mylar to the keyboard.
2
Align the screw holes on the keyboard with the screw holes on the palm-
rest assembly.
3
Replace the screws that secure the keyboard to the palm-rest assembly.
4
Adhere the Mylar to the screws that secure the keyboard to the palm-rest
assembly.
5
Connect the keyboard cable and keyboard-backlight cable to the
keyboard-controls board.
Post-requisites
1
Replace the
system
2
Replace the
hard
3
Replace the battery.
4
Replace the
base
56
computer. After working inside your
board.
drive.
cover.
After working inside your