About Language Setting - Sony HDR-CX190 Operating Manual

Note
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and
can radiate radio frequency energy and,
if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.

Increase the separation between the

equipment and receiver.
Connect the equipment into an outlet on

a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/

TV technician for help.
The supplied interface cable must be used
with the equipment in order to comply with
the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
US


About language setting

The on-screen displays in each local language

are used for illustrating the operating
procedures. Change the screen language before
using the camcorder if necessary (p. 23).
On recording
Before starting to record, test the recording

function to make sure the image and sound are
recorded without any problems.
Compensation for the contents of recordings

cannot be provided, even if recording or
playback is not possible due to a malfunction of
the camcorder, recording media, etc.
TV color systems differ depending on the

country/region. To view your recordings on a
TV, you need a NTSC system-based TV.
Television programs, films, video tapes,

and other materials may be copyrighted.
Unauthorized recording of such materials may
be contrary to the copyright laws.
Notes on use
Do not do any of the following. Otherwise, the

recording media may be damaged, recorded
images may be impossible to play back or may
be lost, or other malfunctions could occur.
ejecting the memory card when the access

lamp (p. 24) is lit or flashing
removing the battery pack or AC Adaptor

from the camcorder, or applying mechanical
shock or vibration to the camcorder when the
(Movie)/ (Photo) lamps (p. 26) or the
access lamp (p. 24) are lit or flashing
When the camcorder is connected to other

devices through a USB connection and the
power of the camcorder is turned on, do not
close the LCD panel. The image data that has
been recorded may be lost.
Use the camcorder in accordance with local

regulations.