About Language Setting; Notes On Use - Sony HDR-PJ710 Operating Manual

Connect the equipment into an outlet on

a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/

TV technician for help.
The supplied interface cable must be used
with the equipment in order to comply with
the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
For the State of California , USA only
Perchlorate Material – special handling may
apply,
See
www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material: Lithium battery
contains perchlorate.
For the customers in Canada
This device complies with RSS-310 of
Industry Canada. Operation is subject to
the condition that this device does not
cause harmful interference.
US


About language setting

The on-screen displays in each local language

are used for illustrating the operating
procedures. Change the screen language before
using the camcorder if necessary (p. 22).
On recording
Before starting to record, test the recording

function to make sure the image and sound are
recorded without any problems.
Compensation for the contents of recordings

cannot be provided, even if recording or
playback is not possible due to a malfunction of
the camcorder, recording media, etc.
TV color systems differ depending on the

country/region. To view your recordings on a
TV, you need a NTSC system-based TV.
Television programs, films, video tapes,

and other materials may be copyrighted.
Unauthorized recording of such materials may
be contrary to the copyright laws.

Notes on use

Do not do any of the following. Otherwise, the

recording media may be damaged, recorded
images may be impossible to play back or may
be lost, or other malfunctions could occur.
ejecting the memory card when the access

lamp (p. 25) is lit or flashing
removing the battery pack or AC Adaptor

from the camcorder, or applying mechanical
shock or vibration to the camcorder when the
(Movie)/ (Photo) lamps (p. 27) or the
access lamp (p. 25) are lit or flashing
When the camcorder is connected to other

devices through a USB connection and the
power of the camcorder is turned on, do not
close the LCD panel. The image data that has
been recorded may be lost.
Use the camcorder in accordance with local

regulations.