Projector + Personal Computer - Mitsubishi SD200U User Manual

Mitsubishi data projector user manual
Hide thumbs Also See for SD200U:
Table of Contents

Advertisement

Projector + Personal computer

VIDEO 1
S-VIDEO
MAIN
AC IN
VIDEO
AUDIO
to AUDIO IN
Important:
• When you use a long RGB cable instead of the cable provided, the picture quality may deteriorate.
• Connectors or analog RGB output adapters may be necessary depending on the PC connected to this projector.
Please contact your dealer.
• The audio input for this projector is a stereo pin jack. (Speaker output is mono.) Please check the available
cable for the audio input terminal of the PC. Some personal computer may not have the audio output terminal.
For using Macintosh
• A monitor output adapter is necessary for a Macintosh if it has no video port. Please contact your dealer.
• A MAC adapter for RGB cable may be necessary depending on the personal computer connected to this projec-
tor. Please contact your dealer.
About DDC™ (For COMPUTER 1 IN connector)
The projector complies with VESA™ DDC™ 1/2B (EDID) specification. If your computer provides DDC™ 1/2B (EDID)
function, setup will be done automatically. If your system is Windows
standard. If your system is Windows
this function. Please contact your dealer or Mitsubishi sales office for more details.
to COMPUTER (1or2) IN
MOUSE /RS-232C
VIDEO 2
COMPUTER 1 IN
IN
IN
AUDIO OUT
COMPUTER 2 / COMPONENT IN
COMPUTER OUT
COMPUTER
AUDIO IN
When outputting to both a
PC monitor and the projector.
Audio cable (option)
®
95 or lower, you must down load the driver from our Internet Home Page for use
RGB cable for PC
computer
to COMPUTER
OUT
RGB cable for PC (option)
®
98 or higher, your computer supported in
to monitor port
AUDIO OUT
MONITOR OUTPUT
to PC audio
output
EN – 11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xd200u

Table of Contents