Connections; Connecting Video Equipment - Mitsubishi LVP-X30U User Manual

C o n n e c t i o n s
C o n n e c t i n g
You can connect up to two pieces of video equipment to the unit following the illustrations below.
• You can switch the input source (picture) to VIDEO or S-VIDEO when you connect two pieces of equipment.
(The S-VIDEO connection provides more vivid color and higher resolution compared to the VIDEO connection.)
• You can output the sound of only one component through the unit speaker even when two components are connected.
When connecting two external units, the audio from either one of these units can be output from the speaker of this device. Audio can be
turned on and off for video related input (video, S-video) from the menu or RGB (or YCbCr) input. (see page 28)
Connection to the VIDEO jack of the unit
Audio cable (accessory)
Audio adaptor (accessory)
Rear panel jacks of this
device
Connection to the S-VIDEO jack of the unit
Audio cable (accessory)
Audio adaptor (accessory)
Rear panel jacks of this
device
v i d e o e q u i p m e n t
VCR/DVD player/laser disc player, etc.
(L) (R)
White Red
AUDIO MOUSE RGB / YCbCr
VCR/DVD player/laser disc player, etc.
(R)
(L)
White Red
AUDIO MOUSE RGB / YCbCr
E – 10
Yellow
To video out jack
To audio out jack
Video cable (accessory)
S-VIDEO VIDEO
Yellow
To S-video out jack
To audio out jack
S-video cable (accessory)
S-VIDEO VIDEO