Table of Contents
Advertisement
Basic connections
This projector can be connected to equipment such as PC, VCRs, video cameras and DVD players.
Important:
• Make sure that your equipment is turned off before connection.
• Plug in firmly and unplug by holding the plug, not by pulling the AC power cord.
• If connected units are set too close to one another, the image may be affected.
• Refer to the user manual of each component for details of connections.
Projector + AV equipment
Important:
• Match the color of video and audio plugs on the AV cable with the connections.
• S-video signals take priority over video signals. If you input both S-video signals and normal video signals at
the same time, the normal video input automatically is inhibited.
• Speaker output is mono.
• Select AUDIO MODE VIDEO to hear and to sound for the VIDEO. (Refer to page 16).
• When connecting audio output of equipment which audio output is mono, connect to audio input L terminal.
Projector + DVD player or HDTV decoder
Some DVD players have output terminal for 3 line fitting (Y, C
COMPUTER IN of the projector.
DVD player generally has SDTV system component video output (Y, C
system component video output (Y, P
decoder, the signal cuircuit automaticaly applied to either of them
SIGNAL menu becomes [Y, C
DVD player or HDTV decoder
Y
G
• Y, P
, P
is an example of the terminal names for a HDTV decoder.
B
R
• The terminal name is different depending on the connected equipment.
• Use mini D-SUB 15 pin-BNC conversion cable for connection.
• Some DVD players may not project the image correctly.
• When connecting with HDTV equipment which has R, G, B output, set RGB for the COMPUTER INPUT in
the SIGNAL setting menu.
• Change the setting in the SIGNAL menu, when 525p signal is inputted. (Refer to page 20).
EN – 10
S-VIDEO
COMPUTER OUT
COMPUTER IN
RS-232C
VIDEO IN
VIDEO
AUDIO L
(MONO)
AUDIO R
VCR etc.
, P
) terminals. When connecting the projector with DVD player or HDTV
B
R
, C
/Y, P
, P
].
B
R
B
R
to AUDIO OUT
C
(P
)
C
(P
)
B
B
R
R
BNC - RCA connector
(optional)
No connection
HD/CS
B
R
Mini D-SUB 15 pin-BNC
conversion cable (optional)
Connect either one of these.
MAIN
I
to S-video input
to video input
to audio input
AC IN
to audio output
to video output
to S-video output
, C
). When connecting them to the projector, connect to
B
R
In this case, the COMPUTER INPUT in the
.
AUDIO cable
to AUDIO IN
RS-232C
VD
to COMPUTER
Ferrite core
, C
) terminals. HDTV decoder has HDTV
B
R
MAIN
S-VIDEO
COMPUTER OUT
COMPUTER IN
VIDEO IN
VIDEO
AUDIO L
(MONO)
AUDIO R
AC IN
IN
I
Advertisement
Table of Contents
