Basic Connections; Projector + Av Equipment; Cables And Adapters - Mitsubishi LVP-X120A User Manual

Basic connections

This projector can be connected to equipment such as VCRs, video cameras, videodisc players, and personal comput-
ers having analog RGB input.
Important:
• Make sure that your equipment is turned off before connection.
• Match the color of video and audio plugs on the AV cable with each terminal.
• Plug in firmly and unplug by holding the plug, not by pulling the cable out.
• If connected units are set too close to one another, the image may be affected.
• Refer to the owner's guide of each component for details of connections.

Projector + AV equipment

Make sure that your equipment is turned off before connection.
Important:
S-video signals take priority over video signals. If you input both S-video signals and normal video signals at the
same time, the normal video input automatically is inhibited.
to audio input
to S-video
input
to audio to S-video
output output
VCR, others

Cables and adapters

To connect personal computers to this projector, the following cables and adapters are necessary. The overview
might be different from the picture below.
RGB cable for PC (mini D-SUB 15P plug)
.
Note: The pins numbered 9, 12 and 15 are not connected.
MAC adapter for RGB cable
(mini D-SUB 15P plug - D-SUB 15P plug)
MINI D-SUB 15P
12
Connect either one of these.
to video input
to video
output
Note: Set the dip switch to the appropriate position.
%
D-SUB15P
Projector + DVD player
Some DVD players have output terminal for 3 line fitting (Y, C
C ). When connecting them to the projector, connect to RGB IN
R
of the projector. In this case, set "Y, C
setting in SIGNAL menu.
DVD player
Y C C
B R
R G B
No connection
• Use mini D-SUB 15 pin-BNC conversion cable for connection.
• Some DVD player may not project the image correctly.
PIN NO. PIN NO.
1 1
2 2
3 3
• •
• •
MINI D-SUB 15P • • MINI D-SUB 15P
13 13
14 14
15 15
Display Resolution
mode
13 inch 640 480
16 inch 832 624
19 inch 1024 768
21 inch 1152 870
, C
B R
to RGB IN
Dip switch
1 2 3 4 5 6
ON ON OFF OFF OFF OFF
OFF ON OFF ON OFF OFF
OFF ON ON OFF OFF OFF
ON ON ON ON OFF OFF
,
B
" for RGB/Y, C , C
B R