Changing The Fm/Am Tuning Frequency Setting (Tuner Frq Step); Switching The Video Signal Type (Tv Format); Removing The Limitation On Hdmi Video Output (Monitor Check); Selecting The Hdmi 4K Signal Format (4K Mode) - Yamaha CX-A5100 Owner's Manual

Changing the FM/AM tuning frequency setting
(TUNER FRQ STEP)
(Asia model only)
TUNER FRQ STEP
FM50/AM9
Change the FM/AM tuning frequency setting of the unit depending on your country or
region.
Settings
Select this when you want to adjust the FM frequency by 100-kHz steps
FM100/AM10
and AM by 10-kHz steps.
Select this when you want to adjust the FM frequency by 50-kHz steps
FM50/AM9
and AM by 9-kHz steps.

Switching the video signal type (TV FORMAT)

TV FORMAT
NTSC
Switch the video signal type of the unit so that it matches to the format of your TV.
Settings
NTSC, PAL
Default
U.S.A., Canada, Taiwan and Korea models: NTSC
Other models: PAL
Removing the limitation on HDMI video output
(MONITOR CHECK)
MONITOR CHECK
The unit automatically detects resolutions supported by a TV connected to the HDMI
OUT jack.
Disable the monitor check function if you want to specify a resolution in "Resolution"
(p.131) when the unit cannot detect the TV's resolution or when you want to specify a
different resolution than the detected resolution.
Settings
Enables the monitor check function. (Outputs video signals with a
YES
resolution supported by the TV only.)
Disables the monitor check function. (Outputs video signals with a
SKIP
specified resolution regardless of compatibility with the TV.)
• Reset to "YES" if the unit becomes inoperable because video from the unit cannot be displayed on the TV
after "MONITOR CHECK" has been set to "SKIP".

Selecting the HDMI 4K signal format (4K MODE)

4K MODE
MODE 2
Select the format of signals input/output at the unit when HDMI 4K (60 Hz/50Hz)
compatible TV and playback device are connected to the unit.
Settings
Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:4:4, 4:2:2 or 4:2:0 format.
(4:2:0 format only for VIDEO AUX [HDMI IN] jack)
MODE 1
Depending on the connected devices or HDMI cables, videos may not
be displayed correctly. In this case, select "MODE 2".
MODE 2 Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:2:0 format.
• When "MODE 1" is selected, use a high-speed HDMI cable that supports 18 Gbps.
147
En
YES