Advanced Setup Menu Items; Turning On/Off The Remote Control Sensor (Remote Sensor); Selecting The Remote Control Id (Remote Id); Changing The Fm/Am Tuning Frequency Setting (Tuner Frq Step) - Yamaha AVENTAGE CX-A6200 Owner's Manual

ADVANCED SETUP menu items

X
Default settings are underlined.
Item
REMOTE SENSOR Turns on/off of the remote control sensor on the main unit.
REMOTE ID Selects the unit's remote control ID.
(Brazil, Asia and General models only)
TUNER FRQ STEP
Changes the FM/AM tuning frequency setting.
TV FORMAT Switches the video signal type.
MONITOR CHECK Removes the limitation on HDMI video output.
4K MODE Selects the HDMI 4K (60 Hz/50 Hz) signal format.
DTS MODE Switches the DTS format notification setting.
Creates backup of the settings of the unit, or recovers the settings from
BACKUP/RESTORE
the backup.
INITIALIZE Restores the default settings.
FIRM. UPDATE Updates the firmware.
VERSION Checks the version of firmware currently installed on the unit.
Turning on/off the remote control sensor
(REMOTE SENSOR)
REMOTE SENSOR
ON
Turn on/off the remote control sensor on the main unit. While the remote control sensor is
turned off, you cannot control the unit from the remote control.
Settings
ON Turns on the remote control sensor.
OFF Turns off the remote control sensor.
Function Page
148
148
148
149
149
149
150
150
150
151
151

Selecting the remote control ID (REMOTE ID)

REMOTE ID
Change the unit's remote control ID so that it matches the remote control's ID (default: ID1).
When using multiple Yamaha AV receivers, you can set each remote control with a unique
remote control ID for its corresponding receiver.
Settings
ID1, ID2
■ Changing the remote control ID of the remote control
1
To select ID1, hold down the cursor key (e) and SCENE1 together for 5 seconds.
To select ID2, hold down the cursor key (e) and SCENE2 together for 5 seconds.
X
If the remote control ID does not match that of the unit, "RemID Mismatch" appears on the unit's front
display when the remote control is operated.
Changing the FM/AM tuning frequency setting
(TUNER FRQ STEP)
(Brazil, Asia and General models only)
TUNER FRQ STEP
FM50/AM9
Change the FM/AM tuning frequency setting of the unit depending on your country or region.
Settings
Select this when you want to adjust the FM frequency by 100-kHz steps and AM by
FM100/AM10
10-kHz steps.
Select this when you want to adjust the FM frequency by 50-kHz steps and AM by
FM50/AM9
9-kHz steps.
148
En
ID1