Mitsubishi WD-65000 Owner's Manual page 51

Remote Control Functions: System 4 Home Theater IR Control
Requirements for Operation
A/V devices connected as described on page 15.
Cable Box connected as on page 16 or Cable Box with an S-Video output connected as
on page 19.
TV connected to A/V receiver (TV Monitor Audio Out To A/V Receiver TV Input).
TV Inputs Renamed:
Cable Box connected to Ant A or B
Cable Box connected to Input 1-5
VCR connected to Input 1-5
DVD connected to any Input
Satellite Receiver connected to any Input =
Digital Television Receiver on DTV Input
Remote Control programmed to operate your other A/V Devices by System 4 properly
activated.
IR emitters properly connected and placed.
Operation (VCR as example)
System 4 allows for only one of the
following:
• Cable Box
• Satellite Receiver
• Digital TV Receiver
To watch your VCR:
Turn on the TV and A/V Receiver.
1
Move slide switch to VCR.
2
Point remote at the TV and press the HOME THEATER button.
3
The TV and A/V Receiver should change to the appropriate inputs.
4
Operate the VCR.
5
Other commands from your Mitsubishi
remote control, or other manufacturer's
remote, will be passed through the TV.
= Cannot be Renamed
= Rename To Cable
= Rename To VCR
= Rename To DVD
Rename To DBS
= Cannot Be Renamed
Part IV : Operation
51